商品明細

Veritas® 西式鉋刀 (PMV-11® Block Planes)

  • 料號：05P70.06
  • 售價：$9,500

加入購物車

商品詳細介紹Product Introduction

Veritas® 西式鉋刀 Veritas® BLOCK Plane, PMV-11

●   鉋刀尺寸(長x寬): 7" x 1-3/4"
●   ​鉋刀床角度: 12°
●   ​材質: PM-V11鋼。
●   經過精密機械加工和磨削，使得底部和側面平整，方正，底部研磨平整誤差值為+-0.0015"。
●   鉋刀刃寬度: 1-3/8" 
●   鉋刀刃厚度: 9/34" 
●   鉋刀刃角度 : 25° 
●   加拿大製造​

前方輪盤式旋鈕可調整刀口大小
鉋刀調整桿可控制進刀量，同時具備水平調節功能 使鉋刀設置更加準確容易。
前端內置螺絲可將刀口寬度作記號以便調整後回到最初設定寬度。





Veritas官方網站:


Veritas® Block Plane, PMV-11
7" long by 1-3/4" wide with 12° bed angle; machined and surface ground to half our normal flatness and surface finish specifications; sole and sides are flat and square to within +0.000" and -0.0015" over entire surface
Made from ductile iron; die-cast lever cap; finished with durable powder-coat polymer paint
Norris-type adjuster mechanism combines feed and lateral adjustments, making blade setting accurate and easy
Close manufacturing tolerances reduce backlash to no more than 1/4 turn
Adjuster is locked to body; will not become inadvertently unseated
Mouth adjustment effected by loosening stainless-steel locking knob
Unobtrusive set screw in plane throat allows repeatable mouth positioning while preventing moveable toe from contacting blade
Toe completely enclosed by body casting
Blade is 1-3/8" wide, 9/64" (0.140") thick and available in A2, O1 or PM-V11™; blade has primary bevel of 23° and secondary bevel of 25°; back of blade is lapped flat within + or -0.0002" (two-tenths of a thousandth of an inch) in working area
Made in Canada
Patented


TOP